The smoke exhaust hood of Ji'nan consists of two parts: cover and cover. The cover is made up of three planes, and the cover consists of four planes (or baffle), front, back, left and right.
The lower end of the cone are connected with the cover body, and the upper end is connected with a fume extractor, a movable baffle opening in the cover body or any cover near the window side, a front baffle with a gap of beautiful and delicate, lampblack thoroughly, and no environmental pollution, is conducive to human health, has the advantages of simple structure, low cost.
All the fittings are made of stainless steel and all joints are waterproof, steam proof and smoke proof。
(hood embedded in the ceiling, stainless steel plate, is arranged between the stainless steel plate manufacturing, with a thickness of 1.2 mm and easy disassembly, embedding depth more than 100 mm.
All stainless steel body with cover thickness greater than 1 mm. 1 for manufacturing ventilation made of galvanized plate, a stainless steel valve.
Lighting equipment is splash proof, waterproof, concave type, distribution in each 1000 mm distance, and should be set to all wire conduit, connected with the connection box. The illumination device is greater than or equal to 600lux, the use of energy-saving Chicago neon lights, power unified interface.
青海福彩网 Since the exhaust hood with vertical one surround, easy cleaning, fume discharge tank steam discharge pipe made of stainless steel, in parallel to the hood automatic self cleaning device。
This article from the smoke hood in Ji'nan to provide you, our website is: http://www.qdkailun.com/, we will wholeheartedly provide you with better quality of service, you are welcome to visit!