降低风机磨损磨措施的方法 - 山东通风管道加工厂家

青海福彩网

欢迎访问:济南强顺通风设备有限公司!
一键分享网站到:
服务热线
0531--68856675
网站青海福彩网
公司简介
荣誉资质
青海福彩网
产品中心
工程案例
留言反馈
联系我们

青海福彩网

当前位置: 青海福彩网-青海福彩网 > 降低风机磨损磨措施的方法

降低风机磨损磨措施的方法

发布时间:2017/07/07

  虽然目前风机防磨方法很多,但大多数是局部的和被动的,一种既经济又切实可行的防磨方法亟待提出。从气动设计的角度出发,通过改变粒子轨迹,从根本上降低磨损是风机防磨措施的发展方向。

  Although the wind preventing wear many methods, but most of them are local and passive, an economical and feasible method to put forward anti abrasion. From the perspective of aerodynamic design, by changing the particle trajectory, fundamentally reduce wear is the development direction of wind abrasion - resistant measures.

  风机长期运行造成磨损是再说难免的,那么风机都有哪些磨损形式呢,接下来就由山东通风管道加工带大家了解一下:

  Fan running for a long time, wear and tear is inevitable, then what kind of fan wear form, we come to understand below.

  1.磨粒磨损:离心风机凸凹不平的接触表面,因相对运动下的锉削效应或界面间分散的固体颗粒的研磨作用所导致的磨损。它对叶轮磨损的程度影响最大。在风机中固体颗粒以一定的速度与零件表面作相对运动就会引起磨粒磨损。
山东通风管道加工

  1。 abrasive wear: centrifugal fan uneven surface of contact, due to the relative movement of the file effect or the interface between the solid particles caused by grinding wear。 It has the greatest influence on the degree of impeller wear。 In the fan, solid particles with a certain speed and relative motion of the surface of the parts, will cause abrasive wear。

  2.疲劳磨损:由于表面疲劳应力(或温度或冲击)引起表面裂纹或鳞屑脱落所致。

  2. fatigue wear: as a result of surface fatigue stress (or temperature or impact) caused by surface cracks or scaling off.

  1.吸附磨损:研究表明,离心风机在其它条件相同时,即使提高加工表面的加工精度等级和洁净度,使彼此贴合更好,但其磨损并不降低,反而因界面贴近,分子吸附作用显著,加重了界面的磨损,称此为吸附磨损。

  1. adsorption wear: the results show that the centrifugal fan under the same other conditions, even improve the surface machining accuracy level and cleanliness, make each other better fit, but the wear is not reduced, but because the interface to molecular adsorption significantly, increased the wear of the interface, called for the adsorption of wear.

青海福彩网  2。冲刷磨损:因固体颗粒对金属表面的冲刷而引起的表面擦伤。

  2. erosion wear: surface erosion caused by erosion of solid particles against metal surfaces.

  您的需求就是我们努力的方向,您的追求就是我们的追求,山东通风管道加工欢迎您的到来,我们一起进步,一起创新!

  Your demand is the direction of our efforts, your pursuit is our pursuit, Shandong ventilation pipe processing welcome your arrival, we progress together, with innovation!

网站青海福彩网 公司简介 荣誉资质 青海福彩网 产品中心 工程案例 留言反馈 联系我们
contact us联系我们
地址:济南市天桥区
电话:0531--68856675
QR code关注我们
二维码拿出手机扫一扫

本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!

立即咨询 立即咨询 立即咨询
易发彩注册 吉林快3走势 吉林福彩网 千禧彩票注册 天津体育彩票网 湖北快3走势 江西快3 幸运时时彩 甘肃快3 吉林福彩网